Ionos D1 UHF Transceiver Module

The Ionos D1 UHF Transceiver Module is ideally suitable for today’s high performance ISM band RF application. The board is intended for applications over a wide frequency range, including the 433 MHz and 868 MHz European and the 902-928 MHz North American ISM bands.

The Module includes a SEMTECH’s low power UHF transceiver, interface connector, filter and a SMA connector(for external antenna). It is intended for use as high-performance FSK and OOK RF transceiver module for robust frequency agile, half-duplex bi-directional RF links, and where stable and constant RF performance is required over the full operating range.

  • Automated Meter Reading.
  • Wireless Sensor Networks.
  • Home and Building Automation.
  • Wireless Alarm and Security Systems.
  • Industrial Monitoring and Control.
  • Wireless M-BUS.
SPECIFICATION DESCRIPTION
RF
  • High Sensitivity: down to -120 dBm at 1.2 kbps.
  • High Selectivity: 16-tap FIR Channel Filter.
  • Bullet-proof front end: IIP3 = -18 dBm, IIP2 = +35 dBm, 80 dB Blocking Immunity.
  • Programmable output: -18 to +17 dBm in 1dB steps
  • Constant RF performance over voltage range of chip .
  • FSK Bit rates up to 300 kb/s.
  • Fully integrated synthesizer with a resolution of 61 Hz.
  • FSK, GFSK, MSK, GMSK and OOK modulations.
  • 115 dB+ Dynamic Range RSSI.
  • Packet engine with CRC, AES-128 and 66-byte FIFO.
Power consumption
  • 1.8V to 3.6V Supply Voltage
  • Low current(Typically): Sleep Mode=0.1uA
  • Idle mode=1.2uA
  • Standby Mode=1.25uA
  • Receive Mode = 16 mA
  • Transmit Mode = 95mA(at +17dBm)
Form factor
  • 20.50mm X 26.50mm