The thermal Printer controller card developed by Cascademic is a single controller card designed to suit a wide range of printer head mechanisms including 2” and 3”, and with and without auto cutter options. Mechanisms without auto cutter: SEIKO LTP01-245, LTPD345, Fujitsu FTP628MCL, FTP638MCL and with auto cutter: SEIKO CAPD245 and CAPD345.
The card provides designers with a high-quality, cost-effective, space-saving printing solution for POS, kiosk, ticketing, labeling, banking, instrumentation and medical equipment applications. The controller card is small(70X35mm) and can fit into most enclosures.
The Industrial BLDC control solution is an industrial grade device which uses NXP’s Motor Control Unit, and is designed for low to high voltage operation. The solution provides control over motor rotation speed, forward,reverse rotation and failure detection like commutation error, over current and over voltage.Rotor position estimation is done using Hall sensor technique.
The motor speed is controlled using rotor position feedback fed to the speed regulator done by three phase power stage PWM.The solution shall be controlled using RS-485 interface by the user.
The Dunamis A8 IoT module based on the new Freescale Kinetis K series microcontroller based on 32-bit ARM Cortex-M4 core with DSP instructions. It runs at up to 150 MHz. The operating system supported by default is Freescale MQX, Uclinux Kernel.
It also offers all the interfaces needed in a modern embedded device: beside the internal Flash memory, external NAND Flash, 1Gb of DDR2 SDRAM memory, interfaces available for data storage – SD micro card, USB Memory Stick. The module provides glue less connectivity to passive and active LCD’s with resolution up to800×600, as well as 4-wire resistive touch screens without next controller. An integrated Ethernet PHY provides 10/100 Mbit Ethernet connection with time stamp functionality.
The Dunamis A3 IoT Module is a simple yet multiple featured design built on Kinetis L Series Micro controller. The micro controller is based on ARM Cortex M0+Architecture. ARM Cortex M0+ processors are found to consume low power with greater efficiency.
The module specifically supports low power applications availing all major communication interfaces for the user. The maximum operating frequency is 48MHz which can be chosen as per the application requirement. The micro controller has internal flash of 128 KB and RAM 16 KB.
The Dunamis A1 IoT module is a Freescale Kinetis Microcontroller based board with multiple usage applications. The board features Kinetis Low power controller with ARM Cortex M0+ Architecture. ARM Cortex M0+ processors are found to consume low power with greater efficiency.
The microcontroller has a maximum operating frequency of 48 MHz, 256KB flash, 32KB RAM, USB OTG controller, segment LCD controller, major communication interfaces, analog and digital peripherals.
The level crossing gates at present are all manually operated. The negligence of rules from some gate men has been a cause of accidents. To prevent these accidents and negligence, some level of check has to be brought in the level crossing gates. There is a need for devices to be installed at the level crossing to provide a timer based release mechanism of the gate and data logging of the events in the LC Gate.
CASCADEMIC Solutions has introduced a single printer driver card to suit Thermal Printer Mechanisms of varying width.
The controller card supports Bluetooth / WifI /RS232 /USB to satisfy any customer.The card provides designers with a high-quality, cost-effective printing solution for POS, ticketing, labelling, banking, instrumentation and medical equipment applications.
The Printer controller card developed by Cascademic is a single controller card designed to suit various interfaces for 3 inch printer mechanisms
The card provides designers with a high-quality, cost-effective, space-saving printing solution for POS, kiosk, ticketing, labeling, banking, instrumentation and medical equipment applications. The controller card is so small(70X20mm) that it can fit into all range of enclosure.
The Printer controller card developed by Cascademic is a single controller card designed to suit wide range interface.
The card provides designers with a high-quality, cost-effective, space-saving printing solution for POS, kiosk, ticketing, labeling, banking, instrumentation and medical equipment applications. The controller card is so small(70X30mm) that it can fit into all range of enclosure.
The Printer controller card developed by Cascademic is a single controller card designed to suit wide interface.
The card provides designers with a high-quality, cost-effective, space-saving printing solution for POS, kiosk, ticketing, labeling, banking, instrumentation and medical equipment applications. The controller card is so small(70X20mm) that it can fit into all range of enclosure.